The Maestro Vantage and Maestro Legend are centrifugal compressor control systems that were launched by M/s Cameron Compression Systems in 2010. These systems have advanced control and communication capabilities.
10 digital inputs (24VDC)
11 digital outputs (24VDC)
13 analog inputs 4-20 mA signal
4 analog outputs 4-20 mA signal
10 RTD input – 100 ohm platinum
Up to three IO per system
Advanced network communications
Built-in Modbus RTU protocol
Controller configuration transfer
Data logging
Ease of Use
Easy to use Graphical Display
Built-in configuration Wizard
Operator functions similar to legacy Cameron products
Customizable using simple configuration utilities
Selectable control modes
5 Loop allows lower minimum operating pressure and energy savings
4 Loop allows accurate + / – discharge pressure control w.r.t surge control line
Aux control loops for misc. equipment control like cooling water, lubrication system, compressor inlet pressure control
Expandable Input / Output Instrumentation count
Up to three IO modules
Energy savings
MCM (Multiple Compressor Management) system provides multiple compressor coordination for efficient and reliable operation.
5 loop pressure control allows lower operating pressures where the control will modulate the inlet valve to maintain the system pressure for efficient compressor operation.
E-mail Alerts
Send e-mail message on compressor alarm or trip event
Web-server Remote Operation
An extension of standard Web-server function
Allows start/stop, load/unload, operator level set point changes
Auxiliary Control Loop Software
Provides additional generic PID loop
Can be used for water valve control, cooler fans, etc.
MCM (Multiple Compressor Management)
Provides multiple compressors to work as one air system
Operation Scheduler
Programs date and time of operational changes
Programmable thermostat function
Auto Start / Stop
Compressor will start automatically based on a settable system pressure threshold
Windows CE based microprocessor
10″ 640×480 color LCD display
Inputs:10 digital (24VDC), 13 analog (4-20mA ), 10 RTD inputs (100 ohm platinum)
Outputs: 11 digital (24VDC), 4 analog (4-20mA)
Motor Current: Built-in current transmitter
Current Rating: 0-5AAC
Voltage Rating: 0-30VAC max
Enclosure: NEMA 4 / IP55 (outdoor watertight & dustproof)
Input Voltage: 120 VAC
Input Voltage Range: 90-260 VAC
Rated Frequency Range 50-60Hz
Internal Power Supply: 24VDC
Power Consumption: 150W
Temperature Operating Range: 32˚F – 122˚F (0˚C – 50˚C)
Temperature Storage Limits: -10˚F – 140˚F (-23˚C – 60˚C)
Humidity Operating Range: 92.5% Relative Humidity
Safety Approvals: UL, CSA and CE
Auto start/stop
Constant Pressure
Operation scheduler
Auxiliary loop controls
Performance log
Sequencer
Additional IO module
Control panel cooler
NEMA 4X, IP66 enclosure
Purge Z valve
Audible/visual alarm annunciation
On/off dry contacts
MODBUS protocol interface (RS-485 serial port)
CANbus inter-module communication
10″ Color display with two color usage
Multiple languages for global destinations
Numeric and operational direction keys
Local/remote selection keys
Auto/unload selection keys
Acknowledge and reset buttons
Inlet Pressure control
Condensate valve control
Oil heater interlock and control
Motor bearing / stator temp monitoring
Additional vibration and RTD channels
Differential oil pressure across oil filter
Oil level switch
Panel purge switch
Common alarm/trip dry contacts
Temperature compensated flow
Surge detection and count
Auto surge test
Two process control functionality
Turbine driver interface
5-loop constant pressure with selectable auto load/unload enable
5-loop auto dual control and Modulating control
Configurable monitoring and control points
Constant mass flow
4-loop constant pressure control (selectable)
4-loop auto dual control (selectable)
Turbo Airtech is able to supply, Program and repair these controllers on site. In addition, Turbo Airtech can also supply spare parts such as power module and LED backlights for repairs along with Instruction manual. We can also provide newer Maestro Universal, Maestro PLC and Maestro Series 7 controllers with OEM level support.
Turbo Airtech can also provide retrofit kits to upgrade old compressor controls systems to newer ones for all centrifugal compressors including TA2000, TA2020, TA3000, TA6000 etc. as well as Inlet Guide Vanes, Blow-off valves and other products and services according to customer needs.
Maestro Vantage is an advanced air compressor control system that optimizes the performance and efficiency of air compressors. It uses real-time data and intelligent algorithms to monitor and adjust various parameters such as pressure, temperature, and airflow, ensuring optimal operation and energy savings.